Ch-899 Chouchin Radio Controlled Clock Manual Page

Locate the switch on the back. Set it to your zone (e.g., P for Pacific, M for Mountain, C for Central, E for Eastern).

The clock will now wait for the radio signal (MSF in the UK, WWVB in the US, or JJY in Japan). ch-899 chouchin radio controlled clock manual

This is the feature that makes the CH-899 special. After you have inserted the batteries and set the time zone, the clock will attempt to search for the signal. Locate the switch on the back

Stop pressing the button for about 7–8 seconds. The clock will exit manual mode and begin running normally. Troubleshooting & Maintenance This is the feature that makes the CH-899 special

CH-899-MAN-EN Product Type: Radio Controlled (Atomic) Wall Clock / Table Clock Report Date: [Current Date] Objective: To provide a complete operational and troubleshooting guide for the CH-899 Chouchin Radio Controlled Clock.

| Problem | Possible Solution | |---------|------------------| | Clock does not set itself | Move near a window. Remove batteries, wait 1 minute, reinsert. Try manual search (hold WAVE 3 sec). | | Wrong hour (off by 1) | Check DST setting: should be AUTO. | | Wrong time zone | For USA models: set time zone (PST, MST, CST, EST) using TIME ZONE button. | | Low battery indicator | Replace with fresh AA alkaline batteries (do not use rechargeable). | | Hands not moving (analog) | Remove batteries, rotate hands manually to 12:00, reinsert batteries. |