Motomaster Battery Charger 111568 Manual 90%

Do not set the charger on carpeting, upholstery, or paper, as it generates heat during operation. 2. Connection Steps (Battery in Vehicle) Most modern vehicles are negative-grounded (the negative post is connected to the chassis). Identify Polarity:

| Issue | What the manual says | User tip | |-------|----------------------|-----------| | Doesn’t start charging | Battery below minimum voltage (often <3V for 6V mode or <7V for 12V) | Jump-start or use a basic charger to bring voltage up first. | | Flashing error light | Reverse polarity, bad connection, or battery sulfated | Check clamps clean/tight. If sulfated, try desulfation mode (if available) or small trickle for 24h. | | Engine start doesn’t work | Battery must have some charge (≥10V) | Don’t use start mode on a totally dead battery – it won’t work and may damage charger. | | Won’t charge AGM | Not all 111568 versions have AGM profile | If manual says “lead-acid only”, use standard mode but monitor heat. | motomaster battery charger 111568 manual