Never bypass the safety gates, even if the "hot" cycle is running slowly.
| Interval | Action | Tool Needed | |----------|--------|--------------| | | Check controller fan exhaust for airflow | Hand | | Weekly | Clean cooling fins on J3 arm (vertical axis) | Soft brush | | Monthly | Measure motor case temp with IR thermometer | IR thermometer (<85°C) | | Quarterly | Replace cabinet air filter (if equipped) | Sepro Filter Kit #FILT-203 | | Yearly | Re-grease gearboxes (reduces friction heat) | Sepro grease LGHP-2 | sepro robot user manual hot
: Basic reporting and configuration data can often be backed up or exported via a plugged into the teach pendant. Sepro Group Troubleshooting and "Hot" Support Never bypass the safety gates, even if the
: While specific "hot" alarm codes vary by controller (e.g., , , or S900-II Go to product viewer dialog for this item. To ensure safe and optimal operation, follow these
To ensure safe and optimal operation, follow these steps to set up your Sepro robot:
Install a thermal camera above your Sepro robot. Many molders have reduced "HOT" alarms by 90% simply by repositioning the robot away from the molding machine’s core back heat.
Ignoring a "HOT" alarm and attempting to force-reset the robot can permanently demagnetize servo motors and melt encoder wiring.
|