Standard construction specifications serve as the technical backbone for any major development, ensuring that infrastructure is built to a high level of safety, quality, and durability. In Abu Dhabi, these guidelines are strictly regulated by the and the Abu Dhabi Quality and Conformity Council (QCC) .
A. Ready-Mix: Concrete shall be obtained from a DMT-approved ready-mix plant. Slump tests shall be performed at the point of discharge. B. Placement: Concrete shall be placed within 90 minutes of batching. It shall not be dropped from a height exceeding 1.5 meters to prevent segregation. C. Curing: Concrete shall be cured for a minimum of 7 days using water, curing compounds, or polyethylene sheeting to prevent moisture loss in the arid climate. standard construction specifications part 3 abu dhabi
They ensure that utility chamber access openings are perfectly integrated into the paving pattern, rather than appearing as an afterthought. 4. The Final Verification Ready-Mix: Concrete shall be obtained from a DMT-approved
Standard Construction Specifications – Part 3: Execution and Workmanship Jurisdiction: Abu Dhabi, United Arab Emirates Applicable Standards: Abu Dhabi Department of Municipalities and Transport (DMT), Abu Dhabi Municipality (ADM), and International Best Practices. Placement: Concrete shall be placed within 90 minutes
Guidelines for signage, road markings, and safety barriers.
Pro Tip: If your project seeks a , hire a commissioning authority (CxA) specialized in Part 3 finishes during the design phase—not after drywall is up.
: Specific guidelines for the maintenance and renewal of existing pavement structures. Related Standard Specifications