Eberle Instat 6 User Manual English -

For permanent access, we recommend downloading the PDF from a verified repository. Here is a direct navigation path for the Siemens archive:

– Search the Siemens Building Products support site using: "Instat 6" manual filetype:pdf eberle instat 6 user manual english

The INSTAT 6 typically allows up to per day. For permanent access, we recommend downloading the PDF

Disables heating control while maintaining basic monitoring (e.g., frost protection). Step-by-Step Programming Guide Step-by-Step Programming Guide The Eberle Instat 6 user

The Eberle Instat 6 user manual in English provides comprehensive guidance on the device's operation, installation, and maintenance. The manual highlights the device's advanced features and functions, including temperature control, timer functions, and alarm handling. By following the guidelines outlined in the manual, users can ensure safe and efficient operation of the device, and troubleshoot common issues.

| Parameter | Description | Range | Default | Typical setting | |-----------|-------------|-------|---------|------------------| | P01 | Temperature control type | 0=ON/OFF, 1=PID | 0 | 1 for underfloor heating, 0 for radiators | | P02 | Cycle time (minutes) – only for ON/OFF | 1-30 | 10 | 5 for gas boiler, 15 for electric | | P03 | Minimum setpoint limit | 5-15°C | 5 | 10 (to prevent excessive cooling) | | P04 | Maximum setpoint limit | 20-35°C | 30 | 27 | | P05 | Frost protection temperature | 5-15°C | 7 | 7 | | P06 | Open window detection sensitivity | 0=off, 1-3 (1=low) | 2 | 1 if room has frequent drafts | | P07 | Display brightness | 1-5 | 3 | 2 | | P08 | Sensor calibration offset | -3 to +3°C | 0 | Use if measured temp differs |

Tip: To disable a switching time (e.g., you only need 2 events), set its temperature to -- and confirm – that event will be skipped.