Write Imei R3.0.0.1 -

Simple interface with "Normal Mode" and "Diag Mode" options. Install the correct SPD Drivers on your PC.

: Power off the device and connect it to the PC using a USB cable while holding specific hardware keys (like Volume Up/Down) to enter Diag mode. write imei r3.0.0.1

: Enter the valid IMEI (usually found on the device's box or original bill) into the designated fields and click "Write". Confirmation : A "Pass" message indicates the operation was successful. Important Considerations Simple interface with "Normal Mode" and "Diag Mode" options