Gmr-32b Phase - Controller Manual

Approximately 79 x 23 x 79 mm; weight is about 150g. Protection Features

These diagrams are representative. Always cross-check with your unit’s sticker. gmr-32b phase controller manual

The controller manages the engine start sequence, including pre-heat, crank attempts, and fuel solenoid engagement. It monitors engine parameters via the CANbus protocol (J1939) or standard analog senders (oil pressure, coolant temperature). Approximately 79 x 23 x 79 mm; weight is about 150g

Secure the relay onto a standard 35mm DIN rail or use the M4 screw holes. gmr-32b phase controller manual

Significant differences in voltage between the phases create excessive heat in motor windings. The device calculates this asymmetry and safely disengages the system. Installation & Wiring Guide