: If an export stops at a specific record, that station entry might be corrupted. You may need to manually remove or fix that specific station in the Communication Manager before the export can complete.
Ensure your CM login has "read" permissions. If you can’t run list station manually in the terminal, the export will fail. Conclusion avaya site administration export list station
Navigate to the tab on the left-side menu or select System > Advanced > Export Data from the top menu. : If an export stops at a specific
| Problem | Likely Cause | Solution | | :--- | :--- | :--- | | Output is truncated | Session page limit | Use set session list page off your command | | Garbage characters in CSV | ANSI/VT100 escape codes | Use set session terminal emulation none or export via Reports tool | | "List" command times out | Too many stations (e.g., list station all for 50k stations) | Break it down: list station 1000-1999 , then 2000-2999 , etc. | | Missing station names | Name field was never populated | That's a data integrity issue, not export. Use change station to add. | | Column alignment broken | Using copy-paste from terminal | Use File > Log, not Ctrl+C. Or use Station Audit report. | If you can’t run list station manually in
To export a station list in Avaya Site Administration (ASA), you can use the wizard or the Report tool. 0;92;0;a3; 0;baf;0;e4; Method 1: Using the Export Data Wizard
If you want every station, leave this blank. If you only want a specific range (e.g., extensions starting with 500), you can set a filter here. Click Next , then click Finish . Step 3: Running the Task